Loading…
Member
harry wrote: hmm, cant find it, can u post a pic or a link to pic pls? Here's the page link... https://forum.ridinggravel.com/post/chinese-carbon-gravel-build-carbonda-8254658?pid=1317335110 You might have to scroll…
harry wrote: Sorry if it's unrelated, but finally decided to post my CFR-505 build, any questions are welcome. https://www.pedalroom.com/bike/carbonda-gravelcommuter-hybrid-1x11-43890 Nice! I just posted my recent flat…
NorthboundRick wrote: Sounds like you'r aren't that bad then. Anyways, w hich wheels are you using? I like that they are all black and no brand stickers or etchings are disturbing the clean look! Well chosen! They were…
NorthboundRick wrote: I have have purchased UD Carbon matte finish for other bike parts before, but I guess I have been luckcky since what Carbonda delivered is really hit and miss. The finish is like shown on your…
Colt__Seavers wrote: There are always pros and cons about external/internal battery and everyone has to find out which pros overweight the cons. Exactly. For me the piece of mind that I don't have to drop another $150+…
Colt__Seavers wrote: Backup battery? What kind of trips are you doing over thousand kilometers. My Di2 battery lasts forever. Maybe charge every 2 to 3k km on a 1x setup Not a backup for rides, but in case the battery…
Colt__Seavers wrote: very nice to see more flat bar gravel rides coming. I think it's very legit to use the 696 also with flat bar. If I would use the same stem length on the flat bare which O used for drops I don't…
NorthboundRick wrote: nice! Thanks for sharing, couple of questions. 1) is this UD black or painted black? 2) di2: „ clean up some wiring“ can you please explain? Also looks like you are Not routing internal or at least…
chadrandom wrote: THANK YOU so much for posting this! I've been really curious about the feasibility of using the 696 for a flatbar setup. I've read concerns on forums about the geometry not being ideal, however I've…
Thought I'd share some updates I made to my 696. I've swapped out the drops for flats. I have a lower back and right shoulder issues. The more upright position is perfect for my style of riding. I have a 1x11 Di2 setup…
ganski wrote: Anyone fit a full size frame bag on their 696? I have a size 52 and wondering if anyone had done this yet before I start taking a bunch of measurements. Thanks I have a 54 with a large Oveja Negra half…
smoothmoose wrote: Ibis 733 wheels $499 MSRP (on sale for $399 link below). 1590g, 29mm ID wheelset they spec on the 650b Ibis Hakka MX. https://glorycycles.com/ibis-733-aluminum-wheelset-100-142-shimano-sram-freehub/…
oleritter hooked me up guys! Thanks to all who replied.
garciawork wrote: First, switch to centerlock (ha!), second, comp cyclist had a mercury wheelset that was 6 bolt and discounted frequently I have almost bought a few times. Last, check out Huny bike wheels in the UK.…
CraigB wrote: How about these:…
I'm looking to upgrade my current 650b wheelset. I'm looking for a set with wide rims, shimano spline freehub, 6 bolt disc, 12x100mm front (or convertible to 12mm), 12x142mm rear. Like to be under 1600g in weight and…
HOG2001 wrote: What did they charge for the fork mounts? I think it was like $10 extra for the mounts added. I plan on getting the problem solver bow tie mounts. That way I can keep them on and not be in the way.
HOG2001 wrote: Bikepacking upgrade with the Fyxation Sparta All Road Carbon Fork. Slightly different geometry and a bit heavier than the Carbonda fork. Nice! You could have gotten a fork with mounts from Carbonda when…
kittrin wrote: Has anyone found a trainer-compatible thru axle for the 505? Or know the thread pitch for the axle? Super stoked for gravel race season this winter/spring but gotta get on the trainer These 2 companies…
Jorgen wrote: I need new headset bearings for my CFR505. Could someone please tell me what I need to buy.. thanks This is what I purchased for my 696 and it fit perfectly.…