Loading…
Member
As a member of a household with 4 Litespeeds and 3 Lynskey's (plus one Quintanoo Roo, but neither of the 2 options above) I can not understand why the worry about the PF30 Bottom Bracket. Newsflash, the bearings in the…
Following this! I would like to do this some time and have tried to find the best routes, but also don't have much info. I know that Nonesuch Tours does tours in the north of the Province and it looks like there are…
For the hilly gravel in east TN which is frequently loose over hard pack, the MSO's didn't seem to have enough bite on the uphills and a little loose cornering compared to the Gravel King SK's. I think they rolled…
I did two rides on them of about 20 miles each on a demo bike. Each ride was a mix of TN gravel and hard red clay and some loose mud, but nothing too sloppy. I was relatively impressed i.e. I didn't hate them :-) I…
monkeyrider wrote: There is a lot of great riding in the Jackson area. Yellowstone NP is not terribly bike friendly. The greater Yellowstone ecosystem has a lot of great riding especially in the National Forests/ Island…
So the wife and I are flying out to Idaho to ride Rebecca’s at the end of the month and then staying out west for the week after the race to make a vacation out of it. We’ll still have the bikes with us, so looking for…
Zurichman wrote: trippertim I luv to climb when I am in shape which I am not there yet. Kansas and Iowa would be flatter than Utah races and no high altitudes which I also love. I went to Leadville and Pikes Peak last…
Would really love to come do this race! Beautiful area and looks like a great course, but just got back to TN from the Crusher and can only afford so many travel races. For anybody else looking, I can't testify to how…
I love my 1UP and have yet to meet someone who has one that would not recommend it. Simple, easy to use and robust. https://www.1up-usa.com/
Looks like an awesome course! I've ridden some of the new sections and it is a beautiful area! When I saw that the parkway section was out, my original reaction was disappointment, but when I saw what was added, that…
My first guess would be that you can't go wrong with any of those, but seems like Crested Butte might not meet your criteria for "Not high altitude". I've never been to Vancouver Island / BC, so can't talk to that, but…
Another vote for the Body Float. I've been running one on my gravel bike for 4 years. I actually found that when I switched to my Ti Hardtail 29er with a rigid post that even with 2.2" tires in the 22-24psi range I was…
Mark_Landsaat wrote: I love the Prologo CPC gloves. They are expensive but the grip of the CPC material is amazing and they are super durable. These have been my only glove for the past several years. I have not done…
Cherokee NF Gravel Ride – Reliance, TN What: 34 – 60 miles of gravel in the Cohutta Mountains Where: Hiwassee River State Park Boat Ramp 115 Ellis Creek Rd, Reliance, TN 37369 When: Saturday 5/12/18 @ 8:00 AM. Riding…
Zurichman wrote: So let me at least say this much. I had my cooler left at Betsy's store for this last ride. Not being the techy guy(just own a flip phone)I had somebody at the finish line look up the address for the…
Zurichman wrote: trippletim Thanks This was only my 4th ride of the season as we have been having crappy weather here in Pa. and just now starting to have some decent spring weather. I would have to spend some time down…
Zurichman wrote: Well how did everybody do at the Bootlegger? starting temps I think was around 44 deg. F and I started out with leg warmers/arm warmers/jersey/and a winter vest. My hands and feet were cold the first…
pearl wrote: I wont be able to swing this event this year, but is an easy gear of 34/28 not enough for either the 60 or 100 mile version? For reference, I did Love Valley Roubaix this year and wished I had more, not a…
Here is the RidewithGPS route I have had on my Garmin the last 2 years. Not sure if the turns at the very start and finish are correct, but once out from town, I think everything is correct. This shows it as just under…
Yep, finally took the time to look at the kickstarter page. I had just assumed they would use elastomers instead of a spring based on the stem design, but it is a coil spring. So looks like once past the kickstarter…