Loading…
Member
By the way the eBay ones I sent have been awesome. Robert Axle project is super nice but kind of overkill in my opinion.
Be careful the threads are really soft
Also you need a little bolt that goes on the cage from stopping the clutch from spinning non stop. My rival cage didn't have one. My friend found one off a mtb derailleur that he had in a parts bin that worked. It's a…
Here you go. See attached.
Haha thanks it's a mess right now.
Haven't tested it yet but probably will tomorrow. Mine is a Rival and it worked. That's the correct one in your link and I decided to reuse the sram pulley wheels.
Some new upgrades on my 696. 9-50 ztto cassette with a garbaruk long cage and went back to a 42t chainring. Crazy range!
I received my matte black frame in the US less than 2 weeks after I ordered it
I guess my hole is just bigger. That's what she said.
Thanks for the offer but it worked out fine! Thanks again for the file. I also have a spare since I had to have two of them printed to meet the minimum $15 charge.
The carbonda axles are really soft. I replaced mine as well, the threads go bad rather quickly
Hey guys I just got the 3d printed rear derailleur grommet. It fits pretty loose in the hole FYI. I put a few layers of really thin double sided tape on before mounting it. Hopefully it won't pop off.
Nevermind I'm an idiot. Looks good to go I will order it. Thanks a lot for your help!
Also it's allowing me to scale. 17 inches is what's confusing me. Sorry new to this stuff.
Just to confirm the zip file already has the correct dimensions? Or do I need to have them modify it to 7mm? I'm going to go with sls process and nylon p12 and see if they can dye it in gold to match the other accents.…
Wow thank you so much for the files. Mine is a 696 so I'm assuming it should be the same.
Wow that's awesome. I would pay you to 3d print me one of those. I'm using a grommet my mechanic found in a parts bin along with a zip tie
The 9-50 version of this is arriving today. I'll let you guys know how it goes. I also ordered a Garbaruk long cage for my sram Rival derailleur.
I didn't even get a plastic tube with mine. I just ended up running full housing
I went full housing just because a few members had said that the shifting suffered greatly without full housing. Something about the cable guide under the BB not working correctly.