Loading…
Member
Have you looked at Hunt? https://us.huntbikewheels.com/products/hunt-650b-adventure-sport-disc-gravel-wheelset?variant=34860713738285 Lighter than the stock Fulcrum wheels that came with my RaceMax. I went with the…
I have no experience with this bike but after reading the specs page, I think it will ride well. BB drop is a respectable 70mm. Chainstay length is a nimble 425 (not crazy stable, but quick and will allow for sufficient…
I'm near Atlanta, GA for local pickup.
Like the title says, except these are new in box and never worn. They are too narrow and small for me. $260 retail, yours for $200+ $15 shipping or best offer. Continental US only. PayPal, Venmo or Zelle. Thanks!
Okay, so Dvdslw45, you have not mentioned geometry at all here. The Lauf, Pivot (which someone else mentioned) have VERY aggressive geometry (if you've a long torso or are looking for an aggressive posture). The gravel…
It's normal. Wipe it off. Put your bike away dry. My top tube looks like this after every gravel ride. I recently checked the headset cartridge bearings and all was tight and smooth.
Well, I'm okay with the DS hole near the front of the top tube. That's what I specified. I actually wanted it to be external...until I realized the bottle cage mount on the bottom of the downtube might interfere there.…
JWB475 wrote: The Ratio chainring doesn't fit the Ekar cranks, they have a 123mm? BCD. They will however fit a variety of crank arms with a 110 BCD which is pretty common (SRAM, Shimano, Cane Creek eeWings w/spider,…
Point taken. I'm running 172.5 cranks, 45.5 shoes, 700 × 38c.
Holy cow! This is scary. I ordered a bike from Waltly and approved a design but after the China Cycling vid and several other online discussions, I decided that I NEED to look at the drawing again. I noticed the fender…
I have a 56 and toe overlap is not a concern. What IS a concern, however, are those extra long chain stays and the heft of this bike. In other words, don't sell your road bike until after you ride this bike.
But...does that thign work with Ekar's cranks? It doesn't show it. Why would they not show it? Presumably, they have one in house to try it on...otherwise, they're technically only saying it works with the 13s chain...
linsook wrote: It will work fine with the XD body. The derailleur, if not getting blocked by anything should move the whole width of the cassette, if it's not able to clear 3 cogs than I'd like to find out what is…
Last thing, I swear. 11sp chain, too? Not 10sp? How's the b-tension? Did you lubricate the cable (inside the housing to reduce friction)? 1×? Do you have a size between 52-61? If it's too small, it may have too short…
An 11sp XD cassette? And you're sure it isn't a 12sp cassette?
Your cassette, is it like Shimano's 11sp where that last cog has a built in lip and likes to sit askance when you try and lock it down? Make sure it's properly aligned and not crooked. That, too will mess up the spacing…
TidyDinosaur wrote: I checked that... Does not seems to be bent. Are you sure? Did you put a tool on it and measure using the same part of the rim at 4 points along its rotation? Your symptoms are tell-tale signs for a…
TidyDinosaur wrote: I received my frame yesterday and have been building the whole day today. Sadly I run into a problem setting up my gears... I have the Sensah SRX pro group and am using a 9-42 XD cassette…
tangofox7 wrote: I am the same height (178) and got the 56 and it's always felt big. I wish I got the 54 instead but at the price-point, I just might downsize anyway. Same sentiment on the ride feel. I recently replaced…
MagicLoogies wrote: How do y'all respond when people stop to ask "What kind of bike is that?" I'm getting tired of having to launch into my longwinded story at stoplights about buying directly from a chinese carbon…