Loading…
Member
Aesch wrote: Any idea what the max fender width would be in a cfr696? I'm looking at a set of sks bluemels but in doubt whether 65mm fenders would fit. Since 50 mm tires are a tight fit, I think 65 is not going to fit...
Damn, that paint looks awesome 😁
Their other electronic groupsets seems to have loads of problems, so maybe they better solve those before releasing another product in beta-phase...
I do. When I have to remove a tire with sealant in it, I just take it off as gentle as possible and than suck out the sealant that has accumulated at the bottom with a syringe... You will have to add some more new…
Good call
Like this one? I contacted the store, but they said they have no hanger for the 696 US $29.04 60%OFF | For Pinarello F8 F12 Dogma F10 Disc Gan GRS Disk Prince K8-S Rokh Bikes Rear Gear Axle Thru Derailleur Hanger BRAKE…
vkonrad wrote: Great to hear! So I just have SP41 housing from the shifter to the mechs with both sides capped with the SP40 sealed cap? Where did you route your rear housing? Under the BB with the trapdoor removed or…
vkonrad wrote: My rear brake is already routed through ready to be plugged in After going back hundreds of messages I've found people who claimed to have full outer housing through the frame passing above the BB(?) but…
vkonrad wrote: Was the expander of a decent size or is it one of those microscopic ones that are shorter than the stem? Also, are there any spacers in the headset kit? It is not big. Here is the picture carbonda sent me…
Yeah, I bought a 45mm rim height road/gravel wheelset (1400gr), some 30x30 320g carbon rims and a Novatec 411/412 hub set for a decent discount. You get 5 USD off for every 30 spent (max 15 per order) so that can add…
Yes, I also have a gravel wheelset with Gravelking SK in 43 mm and I have road tires in 32mm. I would not advise the Crosskings as gravel tires. They are too sluggish and they do not handle as great as smaller tires on…
Continental CrossKing in 29x2.0. You have to remove the little rubber spikes on the outer edge of the knobs or they will rub the frame. I have also installed a race king now and this seems to be a little smaller. No…
I have built my 2 wheelsets with novatec hubs. No complaints there... You have to keep an eye on the bearings though and be ready to replace them... I don't really see the need for expensive hubs... They are just a…
A little warning; whatever you do, do not order the cheap 9-42 cassette from Aliexpress. I have 3 and they are all crap... The first was ruined after 1000km and the second and third are really noisy. The second cassette…
GRAVEL214 wrote: When I click the link, what size do I order? I do not see an option for 142 or 148? I have the L120 M12x1.5 and the L171 M12x1.5 TL19
I would just sent them an email with what you are looking for. I asked for a quote for wheels with 50mm rims and they sent me 2 prices with 2 different rims in a couple of days. It was with their own hubs because i did…
I've got these axles: https://www.aliexpress.com/item/1005002555449083.html?spm=a2g0o.order_list.0.0.65c41802PExmsg But be careful; the first time I used the front axle, the handle unscrewed when I tried to remove it.…
I use their headset, it is OK, but do not forget to put grease on it! I did not and the bearings rusted... Their axles are OK but I changed mine to axles with handles for easier switching of wheels. You should indeed…
BasTijs wrote: I'm also considering to build a 696 with 1x Rival XPLR 10-44, but I've never build a bike before...looks like fun though. I'm wondering if there are already more people with the same groupset. I'm also…
acedeuce802 wrote: I actually have the same crank and power meter you linked. I've got these rings from eBay https://www.ebay.com/itm/123706511747, you can fit a 30t on a 110bcd because the 30t is threaded, rather than…