Loading…
Member
singletrack wrote: Thank you for your reply, G-one's will be the next one I'll test. Paying some extra for the addix speedgrip is worth it. I also tried the G one Bite and Ultrabite - was not a fan of them.
I've done all of them multiple times on two different gravel bikes - Schwalbe in 700c and WTB/Continental in 650b. Really depends on what you mostly ride. My rides can be anywhere between 25-40 miles and up to 50% off…
mtbnut87 wrote: 1x or 2x? I have done quite a bit of work with wide range cassettes and Ultegra, XT and GRX in 2x configurations and I can tell you that there are some unique challenges without trying to introduce a new…
Anyone try the cues 11-50 cassette on a GRX derailleur yet?
I have a Rotor 3D+ 50/34, XT 11-42 on a GRX RD-RX810 with no special setup needed. Goatlink/longer B screw not required.
GravelInSipsey wrote: I'm running the 32mm version on my road bike with 19mm internal DT Swiss rims. After about 200 miles, the tires have settled to 32mm wide. From a performance perspective I have no complaints. In…
Assuming hydro because GRX is hydro only: Can confirm from experience Ultegra 8K and GRX 810 brifters/calipers are interchangeable. They also use the same pads.
I have a long torso, short legs and average length arms. That combined with lack of hip flexibility means I need a fairly shallow drop. After trying a couple different combinations I wound up with the carbon VentureMax…
My bike came with a Rotor 3D crankset (and circular rings). After a couple hundred miles I picked up a Rotor Qarbon outer and inner ring. It definitely made me a believer in oval! I couldn't find the left sided Rotor…
As I've built two bikes since the pandemic started, can say I have not seen what you are asking anywhere. Combination of buying a complete bike being more economical with parts shortages and supply chain woes likely…
Update: so can confirm that 40mm is about the upper limit the frame can handle between the rear chainstays, regardless of wheel size. I have some wtb resolute (650x42) mounted on crank brothers wheels and it isn't…
dvdslw45 wrote: Great options there but unfortunately the Niners are out of stock in my size (every other size is available), the Pivot Vault looked appealing until I found out it has some weird rubber isolation thingie…
Just wanted to drop in and say hello. Picked up my Ridley X-Trail in early 2020. (Right before the pandemic / supply chain craziness!) After ~2 years and 2500 miles have pretty much overhauled the entire bike at this…