Loading…
Member
JWK1 wrote: Thank you everyone for the suggestions. I've really gone over it many times and I don't think this is going to work for me. I just want a more upright position, and this geometry makes it difficult. On my…
Henrik0000 wrote: Ok, i thought that already that they did just not sent me everything. I already contacted them if they can send me the cable stops i need. Lets see. Wouldnt I also need a cable stop in the front ? And…
Henrik0000 wrote: Hello, I have bought a CFR505 (Thesis Ob1) and have a question about the shifting cable (only rear). Do i have to run full outer housing thru the frame? Because there a no cable stops or guides inside…
clasher wrote: Just ordered a CFR 505, Wing said it might get painted before the Spring Festival Holiday that starts on the 20th of January and goes until 10 Feb, but I am not worried about waiting a bit... I still have…
impmonkey wrote: What adaptor are you using on the front? I have a typical 160mm adapter and am unable to tighten the bolt up top as there isn't clearance. Thanks! is it possible to use a M6 hex headed screw, tightened…
dfrolovXIII wrote: hey, guys! on my way to PayPal for carbon 696 frameset and I wanted to ask if you sent money to the same account?) 18824518699@163.com is it safe? many thanks in advance! yes, that is the email…
Familyridz wrote: I noticed a couple members ride tandems, and am hoping for some pointers. My son has Down syndrome and very short legs--he barely clears the standover on his 24" kids bike--but he is approaching the…
As above, it suggests a loose headset or wear in the frame cups. Naturally, you will not ride it but take the headset apart and see how loose the bearings are in the frame. good luck, but we would all be much happier if…
gogolo wrote: Hi I ordered a CFR696 with a matte color. It hasn't been built yet, so I could change to glossy. Should I? I like matte very much but some say it will attract dirt and be hard to clean. Has someone matte…
Last October, I received my long awaited CFR505. I had the typical headset issue so I would recommend buying a suitable headset that has a non-split crown race for the lower headset bearing. The other issue that I had…
qbas wrote: Hello, I'm in the process of assembling my 696, 58cm. Frame looks OK, I just wonder about 2 things: I will be running GRX Di2 2x - is there a grommet for rear mech. cable attached with frame, am I missing…
Advice please! I wrote a few weeks back that I received a 505, I am just about to build it up. I mentioned that I also had issues with an oversized steerer tube. I want back to page one of this forum post and this had…
edraven wrote: Has anyone heard from Adam recently? No response about the October restocking. No reply from an email from three days ago. Hope he is ok.
chadrandom wrote: Did you order the frame with a BB386? Or that was a surprise? oh, I ordered it alright as there were no PF30 or BSA available. I twisted the numbers around to read 368 and converted that in to 30mm…
Anfielder wrote: After only 11 days, via WXY-DPD, my frame has arrived from China. I can’t fault the delivery time as I was quoted 15-35 days to the UK. I unpacked the fork and... it measures 39.94-40.17. Time to get…
After only 11 days, via WXY-DPD, my frame has arrived from China. I can’t fault the delivery time as I was quoted 15-35 days to the UK. I unpacked the fork and... it measures 39.94-40.17. Time to get the emery cloth…
moukari wrote: Shame that it has been delayed. Which shipping method will be used for you? What I've understood the shipping date Carbonda tell to customer is different from the actual date it leaves the city. For me…
GravelCat wrote: I still haven't received a "shipped" status on mine and spoke to Adam over a week ago and he said it would be shipped in 10 days. Kind of getting worried that what he's saying is just smoke and he…