Anyone with experience running 1x10 set up using the following: Gevenalle Shfters (listed on their site as compatible with derailleur) Shimano Deore RD-M6000-SGS 10-speed derailleur Shimano Deore 11-46t
Shimano's website states the max cog is 32T but I think that is when there is 2x10 set up. Can't find anything about a 1x10 setup.
Not clear what you're asking. Max cog is max cog, and 46 is a l o n g way from 32. You'll need a long adapter for that at which point shifting in the small cogs is going to suffer. A lot. Unless you mean 32T capacity. That does depend on whether you're 1x or 2x, but even at 1x you're 3 teeth past the recommended limit (1 or maybe 2 is probably OK but 3 is a stretch). And with 1x you can't get around it by avoiding cross chaining.
